Standard lamp
This striking standard lamp comprises of a crankshaft from a Rover
V8 engine which is bolted to the automatic flywheel/flex plate from the same
engine. This forms a very stable base for the attached lamp (an off the shelf
pre wired unit)
The crank and flywheel have been bead blasted and then powder coated to a deep gloss finish which perfectly matches the lamp stem! This has been done professionally and looks very smart! The total height of the lamp from the base to the tip of the shade is 940 mm. The height of the crank is 630 mm and the diameter of the base is 330 mm.
Price from- £120
V8 engine which is bolted to the automatic flywheel/flex plate from the same
engine. This forms a very stable base for the attached lamp (an off the shelf
pre wired unit)
The crank and flywheel have been bead blasted and then powder coated to a deep gloss finish which perfectly matches the lamp stem! This has been done professionally and looks very smart! The total height of the lamp from the base to the tip of the shade is 940 mm. The height of the crank is 630 mm and the diameter of the base is 330 mm.
Price from- £120
Coat stand
The base is formed by the crank and flex plate from a Rover V8 engine. Fixed to the top of this is a steel arrangement which has four arms. Each arm is terminated by an exhaust valve from the cylinder head of a RV8 engine! The whole item has then been bead blasted and powder coated to
a VERY high standard. As you can see in the photos the finish is metallic chrome, not a cheaper “flat” finish as you might see on alloy wheels etc.
The dimensions of the piece are; 1720 mm in height from the base to the highest point of the top valve, the diameter of the base is 330 mm and finally the height of the crank is 630 mm.
The item splits in two for transit (into the stem and then crank
base) and weighs around 12 kg in total.
Price- £220
a VERY high standard. As you can see in the photos the finish is metallic chrome, not a cheaper “flat” finish as you might see on alloy wheels etc.
The dimensions of the piece are; 1720 mm in height from the base to the highest point of the top valve, the diameter of the base is 330 mm and finally the height of the crank is 630 mm.
The item splits in two for transit (into the stem and then crank
base) and weighs around 12 kg in total.
Price- £220
Smaller crank based tables-
Based around old V8 crank shafts and topped in both wood and glass these tables offer something for every setting!
Available in a range of finishes and colours these tables make a great focal point in any room!
Contact me for more information.
With prices from £200.00 there is something for every budget.
Available in a range of finishes and colours these tables make a great focal point in any room!
Contact me for more information.
With prices from £200.00 there is something for every budget.
